| Service | Price | w/ Fitment |
|---|
| Hourly Shop Rate (1hr Minimum) | $150 | |
| Fit New Barrel Blank (Chamber/Thread/Crown) | $395 | |
| True Rem 700 Action | $250 | |
| Muzzle Threading for Suppressor | $175 | $75 |
| Muzzle Threading w/ Blended Protector | $235 | $135 |
| Muzzle Thread Customer Supplied Timed Brake | $220 | |
| Muzzle Thread Customer Supplied Radial Brake | $185 | |
| Timed Brake (APA/Hellfire/MB, etc) | $320 | |
| Radial Ported Brake (Vias/KDF) | $275 | |
| Mount Optic (Level, Torque, Loctite, Boresite) | $150 | |
| Bed with Pillars | $395 | |
| Cerakote - See Tables Below | SEE BELOW | |
CERAKOTE PRICING
Assembly/Disassembly fee is $75
AR Rifles & Gas Guns
Prices use AR rifles as a baseline. Other action styles may be a higher charge depending on complexity.
| Item | Price | Item | Price |
|---|
| Complete Build | $450 | Lower Receiver | $90 |
| Upper Receiver | $90 | Rail/Handguard | $100 |
| Lower, Upper & Rail | $275 | Lower Parts Kit | $100 |
| Upper Parts Kit | $80 | Carrier | $70 |
| Barrel | $100 | Buffer Tube | $30 |
| Stocks | $85 | Gas Block & Tube | $40 |
| Magazine | $35 | | |
Bolt Action Rifles
Prices are for Remington 700 & clones as a baseline. Other models may be a higher charge depending on complexity.
| Item | Price | Item | Price |
|---|
| Complete Build | $275 | Action | $120 |
| Chassis | $200 | Barrel | $100 |
| Barreled Action | $175 | Bolt | $75 |
| Bolt Handle | $25 | Magazine | $35 |
Pistols
| Item | Price | Item | Price |
|---|
| Complete Build | $250 | Frame | $150 |
| Slide | $100 | Small Parts | $50 |
| Barrel | $80 | Magazine | $35 |
Shotguns
| Item | Price | Item | Price |
|---|
| Complete Build | $120 | Receiver | $120 |
| Barrel | $100 | Magazine Tube | $80 |
| Bolt | $80 | | |
Optics & Accessories
Prices with a (+) are baseline figures. Price may increase depending on the amount of masking or disassembly required.
| Item | Price | Item | Price |
|---|
| Scopes | $250+ | Mounts | $75 |
| Lights | $125 | Bipods | $100+ |
| Red Dots | $200+ | Suppressors | $150 |
NOTES:
If possible, all muzzle devices will be blended to the contour of the barrel, leaving an indistinguishable separation.
We do not use shims to time muzzle devices.
Special Project pricing is determined by Time and Material with a not to exceed.
Cerakote: Please, to the best of your ability, clean excess carbon off of your parts prior to delivery. Our degreasing solution is expensive and must be changed when contaminated. Dirty parts may incur a cleaning fee of $100.
We specialize in custom builds. We do not accept firearms for diagnosis or repair.
Prices subject to change.
For information regarding our processes, head over to our FAQ page.
Please visit our contact page for any questions or to make an appointment.
